The flowsheet runs
as a System, not a
set of disconnected steps
End-to-end —
from ore to metal.
from ore to metal.
The Solex
reagent dissolves gold
from ore into solution,
then the gold is captured
on a sorbent and recovered
by electrowinning.
Classic
scheme
scheme
Сyanide
reagent
reagent
a Piece
of Gold Ore
of Gold Ore
20-25%
Innovative
approach
approach
Reagent
Crystal
a Piece
of Gold
Ore
Result:
Pure
Gold
extracts
up to85-92%85-
92%
up to85-92%85-
92%
From losses
to locked —
in recovery
We turn process complexity into measurable results: a target KPI, a clear roadmap, and implementation through stable operating mode.
Before
- Gravity as the primary driver
- Tailings losses: 70–80%
- Unstable KPI
After
- Integrated recovery flowsheet
- Target range: 85–92%
- KPI stabilized through control and SOPs
Circuits and
operating modes
are controlled— not “chased”
Solex amplifies performance when
the process is
engineered correctly
Increase gold recovery at your depository
We combine Solex reagents and engineering expertise to boost metal yield and stabilize the process.
Download the presentation: technology, implementation, and expected results.
Countries Are Increasing
Gold Reserve
To reduce currency risk as
confidence in the U.S. dollar
weakens — demand for gold
is rising.
Gold Spot / U.S. Dollar
5,051.510
Gold isn’t a trend —
it’s a timeless
store of value as currencies lose
purchasing
power.
it’s a timeless
store of value as currencies lose
purchasing
power.
Advantages
of Solex
Technologies
Solex — a clean leaching technology: a next-generation reagent that replaces sodium cyanide in precious metals extraction.
One minute —
and it’s clear
In one short read, you’ll know whether partnering with us makes sense—no extra calls or long presentations.
We’re primarily a consulting and engineering partner—reagent supply is only one part of the solution.
shift from partial extraction to near-complete gold recovery (85–92%) via a tuned leaching flowsheet
a high-yield phase in ~2 days, followed by a controlled finishing stage over ~1 week (36–48 h + 3–7 days)
built for pond-based mine-scale operations (reference pond geometry supports ~68,000 t per cycle)
engineered controls to cut avoidable inefficiencies — up to 4× lower losses vs. baseline modes
run a pilot on your ore with clear KPIs (recovery %, cycle time, losses, solution stability) and a go/no-go gate for scale-up
If you’re looking for end-to-end results — from ore to metal, get in touch and we’ll share a concise pilot plan and clear KPIs tailored to
your ore.
Questions we’re asked
before westart
Clear, concise answers—so you can
make a confident decision.
We begin with a preliminary assessment: your assays/tailings data, current flowsheet, and site constraints. Then we define the pilot program and a practical implementation roadmap.
Assays, current process flowsheet, tailings/feed parameters, available water/power, site constraints, and your operating targets.
It depends on the site and logistics. We start by agreeing on the pilot program and success criteria (KPI) so the pilot produces a management-grade decision.
Initial signals come from the pilot. Then we stabilize performance on-mode: parameter control, SOPs, training, and support until KPI is consistent.
A full solution: problem assessment → Solex supply → engineering → operational support to results. Solex performs best within a properly engineered flowsheet.
We own the technical outcome: flowsheet, operating modes, control, training, and optimization to KPI. From your side, we need a single point of contact and adherence to the operating standards.
We engineer around mineralogy and build in control and adaptive operating modes. Feed variability becomes a managed variable when the control system is in place.
It’s designed for scale: parallel circuits/ponds, modular logic, and clear SOPs—especially important for sites across Africa and Asia.
A stabilized recovery KPI, operating SOPs, controlled circuits, a trained team, and a roadmap for further scale-up.
Schedule a 30-minute technical call and share the initial dataset. We’ll come back with a recovery potential estimate and a step-by-step plan.
We answer the key
questions before we start—so you make decisions
based on data,
not promises.
